Cold Drawn Seamless Steel Tube EN10305-1 E215 / E235 For Hydraulic System

  Cold Drawn Seamless Steel Tube EN10305-1 E215 / E235 For Hydraulic System

Specifications:

• OD:4-60mm,WT:0.5-60mm
• Standard:DIN2391 / EN10305-1/4
• Delivery Condition:NBK(Bright annealing without oxidization)
• Length:5800mm,6000mm.
• Package:Bundles or wooden cases.
• Surface Anti-rust:Both outside and internal tube surface flushing with anti-rust oil.
• Surface quality:very smooth and bright without oxide scale,pock,strach,crack and other defects.
• Surface Cleaness:clean without iron scrap,dust,better for hydraulic system life.
• Mechanical Properties:Better extending rate and strength property,after bending with no deformation,after flattening and flaring process with no crack.
• Test:Tensile Strength Test,Flaring and flattening test,Hardness Test,Chemical Compositon Testing 

Description:

Synopsis of Process Routing: Quality Carbon steel — Cold Drawn — Heat Treatment Without Oxidization (NBK Status) — Nondestructive Testing— Flushing The Internal Hole With Special Equipment Under The High Pressure —Dealing With Antirust Oil On Surface — Plastic Capping On Both Ends.

The raw material we choosing:high quality Bao Steel,XingCheng Steel and HuaiSteel.Physical and chemical inspection will be made to make sure each batch is in qualified range. After piecing,each piece of tube is checked to be in permitted size deviation,this can garantee higher thickness tolerance and concentricity.

Production process quality control: We use the domestic first-class drawing machine,the production process is controlled with high hardness alloy internal and external matrix,so the product dimensions tolerance and ovality are strictly controlled in high level.Through the first, middle and last process inspection to ensure product quality.

Inner and Outer Surface Cleaning: We adopt automatic inner surface cleaning machine, rotating brush cleaning and high pressure oil flushing to clean the inner and outer surface.The new steel tube production craftsmanship can effectively remove all particulate attached to the inner and outer surface of tubes and thus achieving the utmost surface cleaness and polishness.

Finished tube anti-rust oil plating: We adopt high pressure spray plating method, the antirust oil is plated by high pressure jet after ten passes of filtering and one pass of precipitation to safeguard the tubes’ outer and inner surface cleaness and polishness.

Applications:Cold Drawn Seamless Steel Tube EN10305-1 E215 / E235 For Hydraulic System