Click image to view full size image
YD41 series gastight circular connectors are desgined with threaded coupling machinism. The housing material can be Nickle palted brass alloy, nickle plated aluminium alloy, or stainless steel according to different application requirement. There are two types of cable outputs on the plug termination: Single hole for the cable or double holes for the cable. The protection rate is IP65.
YD41 series connectors are mainly used in high -voltage vacuum equipments, various electronic apparatus and electric equipment of the electric power system.
Circumstance Conditions:
Environmental temprature: -40 degrees centigrade ---+100degrees centigrade
Relative humidity: 90%-95%
Vibration: 10~2000Hz, 147m/s2
Shock: 490m/s2
Tightness: 1X10-4PA. Cm3/S
Electrical Features:
Rated current according to contact pins:
Pin diameter: 2mm 4mm
Rated current: 20A 75A
Contact resistance: 10MΩ 10MΩ
Insulation resistance: 1000 MΩ
Rated voltage: 500V
Dielectric withstand voltage: 1500V
Mechanical and physical Features:
Life time: 500 times
Housing: Brass/aluminium alloy/Stainless steel
Plating: Brass/aluminium alloy: Nickle plating
Contact pins: Gilded copper
Insulator: PBT material
Electric Connector (YD41)