GPS Vehicle Tracker (ET800)

FEATURES
- Fix time report
- Fix distance report
- Smart mode report
- Storage for data buffer(3000 points)
- GPRS/SMS communication
- Support indoor AGPS ( new! )
- Smart power saving mode
- 3G module replacement ( new! )
- Lock/unlock door
- Engine Immobilization
- Mileage monitor
- ACC On / off monitor
- Door Open/Close Monitor
- Voice monitor / 2 way call
- Mobile phone maplink location monitor

- SOS Emergency alarm
- Speeding alarm
- Geofence alarm
- Course alarm
- Low battery alarm
- Harsh brake / Crash alarm by 3D motion sensor( new! )
- Main power disconnect alarm
- Lower voltage protection
- Long time no GPS/GPRS signal detection
- Web/ PC / Mobile phone configuration
- Handset phone for onside setting & incab voice call

- Phone book
- Message
- Dispatch LCD data display & Navigator
- Temperature Monitor
- Up to 4 cameras for picture update
- Fix time image update
- Emergency image update
- Driver ID key ( Dallas Key )
- Idle time management
- Fatigue driving management
- Route divate report
- Circular / Regutangular/ Multiple shape geofences

- Data logger / Data upload management
- Optional Taxi meter
- Optional rare door sensor
- Optional Fuel Monitor

SPECIFICATIONS
Working voltage: 8 ~ 36V/DC
Power source anti ties: ≥ 80V
Working electric current: Average 85mA @ DC 12V
Sleeping: 15mA @DC 12V
Unit size: 110 × 62.5× 32.5 mm (L x W x H )
Net weight 0.3kg ( Aluminium alloy )
GPRS/GSM requency: 850/900/1800/1900MHz
I/O: Inputs: 6 inputs ( with 3 additional optional)
Outputs: 3 Outputs
GPS performance: U-blox 5M up to 20 satellites
StandardGPS data packet: 102 bytes ( include AGPS data)
--------------------------------------------------------------------------------
GPS Position accuracy<5 meters ( Open area )
CEP without SA Cold start time< 48 sec.
Warm start time< 38 sec., average
Hot start time: <8 seconds, average
Data transfer modes: GPRS (TCP/UDP )
Store temperature: -25 C + 85 C
Working humidity: 25 C + 85 C
Working temperature: -10 C
Data port: RS-232 Series port for Setup, Camera
485 Port for Handset / Navigator / Sensors
+ 5V/DC, 1200mA backup battery.