Ledline Series (Rigid Type)

Specifications:
Features and benefits:
Proprietary enclosed channel The proprietary enclosed channel or track can safely protect the LEDs and PCB inside, allow it to be virtually so impregnable that can withstand the toughest weather conditions, And make the whole lighting system to be more durable. Furthermore, the LEDLINE (RIGID TYPE) is very Easy to be mounted on any surface with this channel. And the high optical input lens covering the Channel will let you take full advantage of the high brightness of the LEDS. This enclosed channel Prominently makes the LEDLINE (RIGID TYPE) a distinct product in the market.

Male and female connector
Each piece of LEDLINE (RIGID TYPE) has a male connector at one end and a female connector at the other
End for easy connections.

Energy efficient low voltage system
Operating on DC 12V, LEDLINE (RIGID TYPE) emits brilliant light that challenge even the brightness of
Sunlight with very low power consumption of only 0.5W per piece.

Long lifetime
Retain high life span up to 100,000 hours.

Easy installation
It can be easily mounted or adhered to any surface with our mounting clips or double sided tape.

Versatile
It can be used in indoors and outdoors for accent lighting and decoration

Low maintenance cost
Virtually no maintenance cost needed.

Installation
As shown below, it is very easy to install the LEDLINE (RIGID TYPE).
1. Because the lighting device is rigid, it can only install in a straight line on a flat surface.
Draw a centerline on the surface on which you want to install the LEDLINE (RIGID TYPE).
2. Secure the mounting clips on an appropriate position on the centerline with screws. (If the surface Is wooden, or plastic, or anything that can be stuck to, and the position will be dry all the time, you Can use double sided tapes to stick them directly on the surface. )
3. Snap the LEDLINE into the mounting clips with the end that has male connector toward the power Supply.
4. Snap the second LEDLINE as step 3, and then the third one... The maximum number is 16 pieces per Power run.
5. Push and insert the male connector of the second piece of the LEDLINE into the female connector of the First one firmly, and then the third and fourth... At last, insert the female connector of the power cord Into the male connector of the first piece.
6. Plug in the LEDLINE