Three Wave Guardrail Forming Machine PLC Roll Forming Line With Single Unrolling Machine

 Three Wave Guardrail Forming Machine PLC Roll Forming Line With Single Unrolling Machine

Description:

1. Rolled thickness:2.0mm-3.5mm cold rolled stee,,hot rolled steel or galvanized steel G350Mpa
2. main motor power: 45kw with speed reducer ,made in China
3. way of drive: joint coupling drive( gearbox for each roller station see picture below)
4. main shaft dia: 100mm   material: 40Cr fine processment
5. roller material: GCR15 quenched 58°-62°,chromed
6. roll station:13stations plus 7 rolls leveling
7. Working speed:5m--12m/min(not including punching)
8. Transducer: Panasonic /Yaskawa made in Japan. 380V 50HZ
9. Way of control: PLC,Panasonic
10. Computer operating panel:MSG touching screen made in Taiwan
 
 

Flowchart:
 
Decoiling — Feeding — leveling ----  Punching — roll forming ---- hydraulic     cut to length — product packing manual

 
Applications:

Expressway guardrail
Barrier rails
Guardrail beams
 

Specifications:

The profile

The structure of equipment
 1, the place putting material

• Single unrolling machine, one side can put material
• Coil weight (Max):7000kg
• Coil dia (Max):1600mm
• Coil Width(Max.):800mm
• Hydraulic power: 4KW
• Diameter of oil pump:120mm  working pressure: 10mpa
•  

2, feeding, leveling

• feed into unit oriented wheel(can right and left adjust)
• into feeding roller, dia is  180mm,material 45# steel, quenched 48°-52°, chromed
• leveling is three roller above and four roller below, quenched and chromed

3, punching (can right and left adjust)

• using hydraulic punching
• oil cylinder dia: 140mm
• working pressure:20mpa
• mould material: Cr12  quenched 58°-62°
• hydraulic power:7.5kw
• size: 1.5m long*1.1m wide*1.2m high

4, roll forming

• main motor power: 45kw
• Three Wave Guardrail Forming Machine PLC Roll Forming Line With Single Unrolling Machine