Two-way hydraulic pool valve

Basic hydraulic double-chambered valve with multi directional ball valve,flow regulator valve or needle valve and 2 way float.N.O. two-way hydraulic command does not enable complete opening, as there is always pressure in the valve closing chamber.A tube running between the valves (preferably 8 mm. and larger) is required for command.Valve in the filling line: When the level drops, the float opens a larger passage and reduces command pressure, which causes the valve to open. When the level rises, the float increases the pressure and closes the valve.Valve in the emptying line: When the level drops, the float increases the pressure and closes the valve. When the level rises, the float opens a larger passage and reduces the command pressure, causing the valve to open.Broad flow range (see table under Technical Data).Installing a calming device around the float to restrain the wave effect is recommended.Installing an external command water filter in addition to the existing flushing in-line filter installed in all C-Valves is recommended.Can be operated by hydraulic or electrical remote control.In installations where downstream pressure is low, installing an orifice in the Quikcoup coupling downstream of the valve to maintain a positive valve pressure is recommended.Closure can be restrained in the event of remote control.The valve shall be installed in-line and shall be supplied to the installation site accompanied by double - grooved connection pipes to be welded