Vortex Flowmeters (DN100)

Product Feature
Virtually No Pressure Loss
There is no moving part to down the pressure.

Corrosion protection, abrasion resistant
The surface was painting with PU coating

High accuracy, Stable performance
The struction is test strictly to ensure the high accuracy and stability

High level of anti-vibration and anti-jamming, wide measuring dimensions
Polyurethane was injected to the sensor boy to ensure the sensor has good capability

Multi-Output Interface4~20mA, Pulse, Alarm Outputs, RS-485 and Modbus Communication

Technical data:
Nominal Meter Size: 10 to 200mm
Liquid Pressure (MPa): 1.0, 1.6, 2.5, 4.0, 16, 25, 35, 42
Accuracy: ± 0.5%, ± 1% (upon req. )
Minimum Conductivity: 5μ S/cm
Electrode Material: SST 316L (standard), Hastelloy, Tantalun, titanium, Tungsten Carbide (upon req. )
Fluid Temperature: -25 to 65 (-13 to 149); -25 to 140(-13 to 284)(opt. )
Liner: CR, FEP, PTFE, PFA
Relative Humidity≤ 85%
Ambient Temperature:
-30 to 60 (-22 to 140)
Current Output:
0 to 10mA or 4 to 20mA

Frequency Output: 0 to 5000Hz with photoelectric isolation
Pulse Output: Adjustable from 0.001 to 1000 Ltr/Pulse

Alarm Output:
Upper Alarm-ALMH, Lower Alarm-ALML with photoelectric isolation
Upper Alarm-ALMH, Lower Alarm-ALML with photoelectric isolation

Communications:
RS-232 without galvanic isolation
RS-485 with galvanic isolation, MODBUS.

Supply Power:
85 to 250VAC (45 to 63Hz)
16 to 36VDC

Power: S10W/AC, S7.5W/DC