Click image to view full size image
the tong dies is used for 58-93r closed head tubing tong in oilwell servicing and drilling operation.
We also able to provide
93-26 three row chain |
58-47 oil seal |
93-7 roller bearing |
58-14 clutch shaft |
819-1 anchor pin |
819-5 split ring |
819-13 adjust collar |
819-9 pressure plate |
58-20 ring gear and pinion |
93-295 side plate |
919-11 outer disc |
819-10 inner disc |
147-1 ring gear |
50-48-1 inserts |
77-90 hydraulic motor |
58-240 hydraulic valve |
93-3-3 transmission case or tong case |
867-23 lever for valve |
93-4 final drive gear |
93-285drag ring sleeve |
50-12low clutch gear |
50-9high clutch gear |
SE58 Closed head Tubing Tong is with variable torque, hydraulic lift, Pressure oil bath lubrication, hardened internal gears, roller chain final drive and two-speed operation. Because they are closed head, the power tong stay on the pipe all the way up. You save time because you don’t have to remove and replace the tongs on the pipe after each joint is pulled. Every joint is gripped with a uniform, predetermined torque between 0.41~8.13kN.m (300~6000 ft. lbs), which is controlled by setting the pressure relief valve. It is interchangeable with foster tubing tong. We are able to provide same Jaw and bushing parts.
55177 tong dies
