Click image to view full size image
Anti Corrosion Pipeline Tape with LDPE +butyl Rubber , Pipe Wrapping Coating Material
Anti corrosion pipe coating tape from China manufacture,the following is the mainly anti corrosion pipe coating tape, Inner wrap and outer wrap:
1) Polyethylene inner wrap:
Thickness should be minimum 0.305 mm (0.012"), with self-adhesive compound thickness 0.203 mm
(0.008") minimum.
Interleaf in rolls supplied shall be double sided release coated paper or polymer preferably with extra
width for roll
protection.
Characteristics of tape:
- Elongation : 250%
- Tensile strength : 7 N/mm2
- Tear resistance : 8 kg/cm
- Dielectric strength : 40 Kvolt/mm
- Insulation strength : 1 x 106 Ohm/mm
- Impact resistance : 3.2 Joules
- Adhesion to steel (With primer) : 2.6 N/mm
- Adhesion to self : 0.5 N/mm
- Temperature range : -5~ C to 90~ C
2) Polyethylene outer wrap :
Thickness should be minimum 0.229 mm (0.009") with 0.102 mm (0.004") self-adhesive compound.
Polyethylene to be White or Silver-Grey light reflecting. Final thickness should be defined as per vendor
data.
Characteristics of tape:
- Elongation : Min 200%
- Dielectric strength : Min. 10 KVolt
- Insulation resistance : 1x1012 Ohm/in
The Anti corrosion pipe coating tape is extensively used in the pipework of oil and natural gas transportation, petrochemical industry,
electric power, metallurgy, urban natural gas network of pipes, the outside anticorrosion project of the
metal pipes involved as well as the outside anticorrosion project of the underground and overhead
metallic conduit of the works of petrochemical industry, natural gas and coal transportation.
Feature:
Excellent adhesion to a wide range of industries, steel piping.
Effortlessly applied with no special equipment (mouldable by hand).
