Click image to view full size image
hydraulic control valve DCV100
Main technical data for DCV100 series sectional control valve as follows:
1.Nominal.Flow:80L/min(=21.13GPM=21.13U.S.gal)
2.Max.Flow:100L/min(=26.42GPM=26.42U.S.gal)
3.Max.Pressure:315bar(=4567.5psi=31.5Mpa)
4.Thread(standard):G3/4”(we normally provide with BSPP thread,other special thread on require)
5.Working sections:1 to 12 all be ok
6.Spool stroke:+7~-7mm
7.Tie-rod tightening torque:55+/-5N.m
8.Parallel circuit(other circuit,such as tandem circuit on request)
9.Low internal leakages
10.High strength cast iron body
11.Nickel plated spools
12.100% tested products before shipment
13.ISO 9001 approved
14.Good quality,timely service
15.Factory directly sales
Introduction about QTfluid company and products
QTfluid(Shanghai)Tech.Co., was built in 2001.We specialize in the design,R&D,manufacture and sale of hydraulic valves.Our main products have been divided into two big parts,monoblock valve and sectional valve.
Our main products are as follows
Monoblock directional control valves
Sectional directional control valves
Proportional control valves
Nonstandard hydraulic control valve
Accessories
At present,we could provide 5 series of monoblock valve and 10 series of sectional valve,for each series,we can supply different control style,such as manual control,detent control,pneumatic control,double control,
electrohydraulic ON-OFF control,cable remote control,hydraulic control and so on.
| item | our solution | remarks |
| material for body | high strength cast iron | |
| mater for main parts | alloy steel | |
| oil ports | BSPP or UN standard | special ports on require |
| seals | adopt United States standard AS 568A | we do not recommend the system be taken out of service for long period(over 4 months) |
| fluids | mineral hydraulic fluid | L-HM 46 in winter L-HM 68 in summer |
| operating temperture | from -20 degree to +80 degree | special application on require |
| filtration | filtration level is 10 microns | replace filter elements regularly |
| warranty for control valve | each product have to go through 7 checks in the manufacturing,and each product have to pass strict inpection before the go out. | |
| warranty time | 12 months |
Application
Our products are used in construction,agriculture and machinery,special vehicle for environment sanitation,oil equipment,spaceflight and military area.
The picture we showed is our sectional control valve of DCV100/5 with manual control and bilateral control.
If there is anything we can help you,please contact with us in time,we will be more than happy to help and support you in any way we can.
DCV100/5 hydraulic control valve 100l/min
