Click image to view full size image
Cast Iron Groove End Butterfly Valve:
Size: DN50-DN300
End flange: ANSI C606
Brief Introduction:
Butterfly valve is mainly consisted of body, stem, disc, seat and driver(lever, gearbox, pneumatic and electric Actuator) and so on.
On off and controlling flow of valve are made by turning stem and disc together.
Characteristics of Product:
1.Small in size and light in weight and maintaince. It can be mounted whereever needed.
2.Simple, compact structure, quick 90 degree on-off operation.
3.Disc has two-way bearing, perfect seal, without leakage under the pressure test.
4.Flow curve tending to straight-line. Excellent regulation performance.
5.Various kinds of materials, applicable to different medium.
6.Strong wash and brush resistance and can fit to bad working condition.
7.Center plate structure, small torque of open and close.
8.Long service life. Standing the test of ten thousands opening and closing operation.
9.Can be used in cutting off and regulation medium.
Typical Application:
Water works and water resource project,Environment protection,Public facilities,
Power and public utilities, Building industry, Petroleum, Chemical, Steel, metallurgy, Paper making,industry, Food, Beverage
Detail Specification:
Series GD wafer butterfly valve, grooved butterfly valve:
Size: DN50-DN300
End flange: ANSI C606
Top flange: ISO 5211
Normal pressure: PN1.6MPa (175PSI)
Body: ASTM A536 65-45-12
Disc: ASTM A536 65-45-12+Rubber
Stem: 1Cr17Ni2 431
O-Ring: NBR
Suitable temperature: -45c~150c
Fresh water, sewage, sea water, air, vapor, food, medicine, oils. alkalis, salt etc.
Assembling Procedure:
Packing Procedure:
Certificates:
Main Facilities:
Machine Workshop:
Successful Pressure Testing for Clients Goods Inspection:
DN50-DN300 Cast Iron groove end butterfly valve
