DT1 oil cooler

DT1 oil cooler

A wide range usage :

such as transmission system , engine , hydraulic and lubrication system etc , it could also be used as a independent cooler;

It can be fitted with 12v/24v DC , 240v/380v AC or hydraulic motor drives fan

Function of DT Series:

Heat will be transferred from the fluid to the cooling air flow

The applications of DT Series:

It can be used for cooling the material below:

Mineral oil , synthetic oil , bio oil , HFA , HFB , HFC , HFD liquids , water and glycol mixture , liquid containing 50% antifreeze and anticorrosive;

The options of DT Series: 

Temperature switch;

Off-line cooling system with pump;

60Hz AC electric motors;

Pusher fans(standard equipment is puller fans)

Material instruction of DT Series:

Cooler : aluminium;

Fan blade : plastic and aluminum;

Wind deflector cover , protective screening , stand bar , motor mounting plate : steel(the surface is galvanized)

Technical data for DT Series:

Easy sizing of DT Cooler:

The following tables may be used to quickly select a DT Cooler. The data is based on the assumption that oil inlet temperature does not exceed 70°C for hydraulic and 110°C for lubrication applications.

Please use the following heat rejection figures if no details are available:

-Agricultural and construction machinery: 1/3 of diesel engine power.

-Hydraulic pumps driven by an electric motor:1/3 of electric motor power.

Hydraulic applications:

Lubrication oil applications:

DT1~DT8 specific heat rejection & pressure drop:

DT9~DT11 specific heat rejection & pressure drop: