Positioner
? Technical Parameter |
| Item. Type | Single Action | Double Action | | Input Signal | 4-20mA DC | | Impedance | 250±15 Ohm | | Supply Pressure | 1.4-7kgf/cm2(20-100psi) | | Stroke | 0~90°C | | Air Connection | PT(NPT)1/4" | | Gauge Connection | PT(NPT)1/8" | | Conduit | PF1/2"(G1/2") | | Explosion Proof | ExdmllB T5 | | ExdmllC T5 | | ExiallB T6 | | Protection | IP66 | | Ambient Temp | Operating: -20°C~70°C | | Explosion: -20°C~60°C | | Linearity | ±1%F.S. | ±2%F.S. | | Hysteresis | ±1%F.S. | | Sensitivity | ±0.2%F.S. | ±0.5%F.S. | | Repeatability | ±0.5%F.S. | | Air Consumption | 3LPM(Sup=1.4kgf/cm2, 20psi) | | Flow Capacity | 80LPM(Sup=1.4kgf/cm2, 20psi) | | Material | Aluminum Diecasting | | Weight | 2.8kg(6.2lb) | |
| |
The Elector-Pneumatic Postioner REP-1000R is used fou operation of pneumatic rotary valve actuators by means of electrical controller or control systems with an analog output signal of DC4 to 20mA or split ranges.
? There is no resonance at 5~200Hz.
? The change of RA/DA Acting is convenient,it is able to apply to single or double acting actuator.
? It is possible to prevent the hunting with orfice to the small size actuator.
? It is economical due to less air consumption.
? It is able to control the 1/2 split range with simple operation without relacement of parts. | |
| |
E/P Positioner REP-1000R(Rotary Type)
Click image to view full size image
