Fiberglass Duct Rods
Duct Rodder applies in tow leadrope through a pipe, it is auxiliary means. Surface smooth
and high resilience, so the FRP perforator with ease passes the narrow channel. perforator
consists of two parts:the glass fiber strengthen the level, the highpressured low density
polyethylene protective layer(smooth, firm , can resist the adverse circumstance).
It has timesaving reducing effort, improving efficiency, etc, And can be used for telecom
cables, cable pipe and cleaning and plastic pipe of cloths to put.when use draws out the
FPR pole by the pulley, then with a corresponding metal joint, penetrates in the pipeline.
When cleaning, guidehead will drive cleaning tools to clean the pipe;When arranges the
cable, you may first leads the steel wire or the iron wire, then enters the pipe with the steel
wire or the iron wire hauling cable.
A.The Fiberglass duct rod type: Dia from 4.5mm to 16mm. The longth of fiberglass rod from
100 meter to 350meter
B. Duct rodders/rods features
1. Strong non-conductive fiberglass rod construction
2. Stainless steel drawing head
3. For longer conduit runs and underground duct
4. Rugged tubular steel reel with adjustable position.
5. Feed device allows rod to feed out or be wound back onto reel with easy pushi or pull of rod.
6. Duct rods/duct rodders have Many applications, not only pulling the cable but also pulling
electric tools, and it repair is very easy, and available.
C. Specifications:
Glass fiber rod diameter | Φ4.5-16mm |
Length | 50-350m |
Working temperature | -40~+80 |
Min Bend Radius | 295mm |
Breaking tension | 4.5T |
Glass fiber density | 150g/m |
Fiberglass duct rodder