filling machine for juice,tea etc hot filling line

filling machine and bottling machine

CGFR16126 washing-filling-capping machine is apply to 500ml,4000-5000bph;

1.Direct connection technology between air conveyor and in-feeding starwheel is applied to replace in-feeding screw and conveying chain to ease bottle changing process with only to change few parts. Newly-designed bottle-separating grippers are assembled to starwheel.
2.Neck-hanging technology is applied in bottle transportation. Instead of traditional starwheel, we use neck-hanging gripper to make bottle-size-changing easily , without equipment height adjustment ,only few parts need to be adjusted .
3.Specially-designed rinser grippers which are made of stainless steel are firm and endurable, with no contact to screw part of the bottle to prevent second pollution.
4.High-speed, easily-cleaned filling valves with big flow volume are equipped with well CIP system and control system to rinse the equipment throughly.
5.splint of starwheel using twist descending way to simplify the process of bottle-size-changing. only need to change arch board and starwheel ,within ten minutes.

Main Technological Parameters

(1) Work heads:

Rinsing heads: 16. Filling heads: 12. Capping heads: 6.

(2) Total output: 4000~5000 b/h (500ml bottle)

(3) Total power: 3.4kw

(4) Height of bottle: 170~320mm Diameter of bottle: 50~100mm

(5) Power supply: AC 380V 50HZ, 3- phases; Control wiring loop: DC 24V

(6) Rinsing water: flow rate—0.8 m3/h. The most hardness of water is 50ppm equivalent calcium carbonate (CaCO3).

(7) Total weight: 2200kg.

(8) Overall size: 2300×1700×2500mm.