Click image to view full size image
Forge CNC Machined Pelton Turbine Runner For Pelton Hydro Turbine / Pelton Water Turbine
Descrition:
The Pelton turbine is widely used in hydropower station with the heads from 80-1600m.
Pelton turbine is consisted of runner, turbine case, nozzles assembly, inlet pipe, deflector etc. The runner is assembled in the shaft of the generator, torque transmission by ping.
.lt utilizes the dynamic power of high pressure water flow to rotate the runner and force the rotor work, The centre line of the jet is in the same plane as the runner while rotating.
Pelton turbine has the advantages of compact construction, stable running and easy operation. Normally, Small pelton turbine always arranged with horizontal shaft and one or two nozzles, Medium size and larger Pelton turbines are most often arranged with vertical shaft, and equip four or six nozzles to obtain more power.
Applications:
1. Water head: 80m - 1000m
2. Power: 0.5MW - 20MW
3. Frequency: 50/ 60hz
4. Generator Output voltage: 0.4KVV, 3.3KV, 6.3KV, or 10.5KV AC three phase,
If you are interested in the Pelton turbine, you should send some key parameters (such as net head, flow discharge, unit number, frequency, voltage) in inquiry.
We can supply pelton turbine generator above 500KW, supply the runner with Forge and CNC machine, or runner with cast abrading machine for your require.
Specifications:
| Type | Horizontal pelton turbine with one /two nozzles Vertical pelton turbine with four nozzles |
| Water head | 80m - 1000m. |
| Installation capacity | 0.5MW - 20MW |
| Runner material | Stainless steel (0Cr13Ni4Mo)
|
