Description:
Good quality and fast high frequency vacuum wood dryer kiln1.Name: timber drying
2.Size:3-10 m3
Good quality and fast highfrequency vacuum wood dryer kiln
Weare specialized in the production of Highfrequency Medium Heating Equipment,
which is widely used in the areas of furniture, wooddrying, Integrated Wood,
scientific wood and bent wood. In 2003, our firm successfully passed ISO9001
certification, which has greatly improved the general management level.
Main sizes of High frequency vacuum wooddryer machine:
Tape | Effective capacity | Power of high frequency | Maximum effective capacity | Applicable materail | Notes |
GZ-3.0III-DX | 3.3m3 | 10KW | 3.0m(L)*1.1m(W)* 0.5m~1.0m(H) | All kinds of wood, especial hard wood.
E.g.: wood, timber, lumber, timbering, lignum | a.High speed
b.Full-automatic |
GZ-4.0III-DX | 4.4m3 | 10KW | 4.0m(L)*1.1m(W)* 0.5m~1.0m(H) | ||
GZ-6.0III-DX | 6.0m3 | 20KW | 5.0m(L)*1.2m(W)* 0.5m~1.0m(H) | ||
GZ-8.0III-DX | 8.0m3 | 30KW | 6.0m(L)*1.3m(W)* 0.5m~1.1m(H) | ||
GZ-10.0III-DX | 10.0m3 | 40KW | 6.0m(L)*1.5m(W)* 0.5m~1.1m(H) |
More technology data (forexample:a 4.0 cubic meter one)
Main data for High frequency vacuum wood dryer oven ( Model: GZ-4.0II-DX)
Capacity: 4.0 cubic meter
Type of work: high-frequency heating, vacuum dehydration
External size: 5330mm×1716mm×1806mm
Weight: 4300 KG
Input power: 12 KW
Dry medium: direct heat
Heating mode: dielectric type
Applicable materials: all kinds of wood
Temperature range: depending on the technology needs
Dry medium mobile: direct heat
Applications: wood drying
Water evaporation capacity: 90 KG / 24 hours (conditions: high frequency power 10 KW, vacuum
degree-0.08MPa, condensing temperature 25 °C)
Other sizes: 3/6/8/10 cubic meter or larger ones as client’s customization
Main data for High frequency generator (for a 4.0 cubic meter )
Power: 10KW
Operation mode: continuous
Applications: to heat and dry timber
Serviceable material: A variety of available
Area: 1 square meter
External size: 950×1050×1750
Weight: 200 KG
Other sizes: GJJ-20-DX(Power:20 KW) , GJJ-30-DX(Power:30 KW), GJJ-50-DX(Power:50 KW)
or others as client’s customization
The advantages of the DXHF-vacuum wooddryer:
Quick heating: It does not require heat conduction, inside and outside of wood timber is
heated at same time.
Fast dehydration: During the heating process, there is staged temperature difference between
inside and outside of wood timber, this will speed up the water movement from inside wood
to outside wood (the principle is contrary to the conventional heating).
Good quality: there will be no cracking, bending and color change by taking control of
heating speed, relative vacuum degree & condensing rate.
Strong adaptability: High frequency vacuum drying can realize not only cold drying but hot
drying, help to eliminate stress, solidify resin. This applies to dry all kinds of wood.
High usage: Square designed drying box supplies more space utilization. It is suitable for
different shaped wood.
Cost saving: Fast temperature raise and higher space utilization takes lower cost than
traditional ways.
Eco-friendly: This machine does not pollute the environment.
Full-automatic: UA Unattended Automatic drying process, very easy to handle.
Good quality and fast high frequency vacuum wood dryer kiln





