Click image to view full size image
HORIZonTAL TYPE GEARED MOTOR
Specifications and Ratings | |
Category | High Speed Reducing Motor |
Gear Ratio | 1/5 ~ 1/200 |
Mounting | Horizontal Foot Mout |
Output Shaft (Ø) | 18mm ~ 60mm |
Gear Material | S45C (High-Frequency Wave), Scm21 (Carbonization) SCM4 (Nitrogen Hardening) |
Motor Specification and Rating | |
Design Standard | IEC, CQC, JIS |
Pole | 4P |
Output Power | 0.09KW ~ 11.25KW (1/8 HP ~ 15HP) |
Rated Frequency | 50Hz / 60Hz |
Time Duty | S1 (Continuous Duty) |
Stator Insulation | Class B |
Method of Starting | Full Voltage Direct On Line or Y-Δ Starting |
Environmental Restriction | |
Place | Indoor. The product should be installed on flat and solid foundation |
Voltage Regulation | 10% |
Frequency Regulation | 5% |
Ambient Temperature | -5°C~40°C |
Attitude | Not exceed 1000 Meters |
Relative Humidity | Less than 85% RH (Non-Condensation) |
Structure | |
Shell Material | Aluminum Alloy (Adc356), Cast lron (Fc25) |
Lubrication | Grease NO.0 |
Bearing | Grease Pre-Packed Double-Shield Rolling Bearing. |
Terminal Box | Larger Size Made by Pressed Steel Which can be Set 90o Apart with Conduit Hole Cable Entrance at Left Side View from The Drive End. |
Lead Terminal | Solderless Lug Teminal |
Painting | Phenolic Rust Proof Plus Lacquer Surface Finished Painting in Blue Color (Munsell 7.5G 4/2.) |
Bolt Thread | ISO Metric System |
Helical Gear Reducer Motor (DLSH Series)
