Click image to view full size image
Cut Tool for hose
Features:
1. Flexibility is good , corrosion-resistant, have long performance life, use safer, because connection of end adopt metal taper to seal,End technology with Expand the side. Able to bear high low-temperature, it is convenient to install, so long as the whorl being screwed on that it can be sealed. Export to Canada and USA.
2. Is it use in gas , liquefied gas , natural gas , oil , water etc.
3. Corrugation hose material select SUS304 , SUS316 or SUS316L, material of both ends selects copper.
4. 150mm--2000mm, Or product according to customer's request.
It is widely used in interior piping system, sanitary ware,kitchen equipment , central air-conditioner , floor heating,wall hanging gas stove & rasiator and so on .
Technical Parameters : | ||||||||||
DN (mm) | Fitting Size | Outside Diameter φA mm) | Inside Diameter φD(mm) | Tolerance (mm) | AISI304 AISI316L | Thickness | AISI304303 | Pn ( bar) | Temperature | Length (mm) |
DN12 | 1/2" | φ18.0 | φ12.5 | ±0.2 | m = 2.2 | 0.18 | h=35.0 | 16 | - 40 ~~ 100 | 200 300 |
DN16 | 1/2" | φ21.0 | φ16.0 | ±0.2 | m = 2.2 | 0.20 | h=35.0 | 10 | ||
DN20 | 3/4" | φ25.0 | φ19.0 | ±0.3 | m = 2.2 | 0.25 | h=40.0 | 10 | ||
DN25 | 1" | φ32.0 | φ25.0 | ±0.3 | m = 2.5 | 0.28 | h=45.0 | 4 | ||
DN32 | 1 1/4" | φ41.0 | φ32.0 | ±0.3 | m = 3.5 | 0.30 | h=50.0 | 3 | ||
DN40 | 1 1/2" | φ50.0 | φ40.0 | ±0.5 | m = 4.0 | 0.40 | h=55.0 | 3 | ||
DN50 | 2" | φ61.0 | φ50.0 | ±0.5 | m = 5.0 | 0.40 | h=60.0 | 3 | ||
hose pipe cutter tool
