Click image to view full size image
Brief introduction of the production line
The forming machine is horizontal and the main part position can be adjusted.
Eurotherm governor is of stable speed and wide adjusting range.
The forming blocks are made of special quality alloy steel with advantage of high rigid degree, good abrasion resistance and minor expansion ratio,etc.
The forming machine can be cooled by air or water with a faster forming speed and good cooling effect.
UPVC MAIN TECHNICAL PARAMETER
Model | Structure | Plastic Materials | Pipe Range(mm) | Max.Output Capacity(kg/h) | Forming Speed (m/min) | |
ID(min) | OD(max) | |||||
JLSB160W | Horizontal | UPVC | 110 | 160 | 260 | 0.8-8 |
PE MAIN TECHNICAL PARAMETER
Model |
Structure | Plastic Materials
| Pipe Range(mm) | Max. Output Capacity(kg/h) | Forming Speed(m/min) | |
ID(min) | OD(max) | |||||
JLSB160W | Horizontal | PE | 110 | 160 | 220 | 0.5-4.5 |
http://www.xinrongextruder.com/product/613-jlsb-series-pe-upvc-single-wall-double-wall-corrugated-pipe-extrusion-line--a6d9/
JLSB series PE/UPVC single-wall/double-wall corrugated pipe extrusion line
