Click image to view full size image
LIFT TABLE POWER UNITS 1
Consisting of high pressure gear pump,AC motor,multi-functional
manifold,valves, tank,this power unit has been widely used in the industry
of logistic devices such as minifork lift,scissors lift and ariel working platfo
rm,.The loweringmovement is controlled by the solenoid valve with the spe
ed controlled by the adjustable throttle valve.
Model Specifications
Model |
Motor Volt |
Motor power |
Rated Speed |
Displacement |
System pressure |
Tank Capacity | L (mm) |
JBZ-F1.2A3E2/GBABU1 |
220VAC |
0.75KW |
1450RPM | 1.2mL/r | 20MPa | 3.5L | 495 |
JBZ-F1.6A3E2/GBABU1 | 1.6mL/r | 16MPa | 3.5L | 495 | |||
JBZ-F2.1B3E2/GBABU1 | 2.1mL/r | 12MPa | 6L |
595
| |||
JBZ-F1.2B4F2/GBABD1 |
380VAC |
1.1KW |
2880RPM
| 1.2mL/r | 20MPa | 6L | |
JBZ-F1.6B4H2/GBABD1 | 1.6mL/r | 16MPa | 6L | ||||
JBZ-F2.1C4F2/GBABU1 | 2.1mL/r | 12MPa | 8L | 665 |
Remark:
1Please go to page 1 or consult our sales engineer for the different pump displacement,motor power or tank capacity.
2.The manual override function is available on request.
Special Notes:
1.The power unit is of S3 duty,which can only be worked intermittentiy,ie.,1 minute on and 9 minutes off.
2.Clean all the hydraulic parts concemed before mounting the power unit.
3.The viscosity of the oil shoud be 15-68 cst.
4.Change the oil after the first 100 hours of using the power unit,then change the oil every 3000 hours.
5.The power unit should be mounted horizontally.
lift table power units1
