Click image to view full size image
MY1224 hydraulic surface grinder
Features:
1,Machine reasonable structure, good rigidity, good looks, easy to operate.
2.Table movement in longitudinal is hydraulic transmission.
3.Spindle motor no vibration and low noise.
This is the detail information of the machine.
Technical Parameters | Unit | MY1224 | |
Max.workpiece to be Ground | mm | 600×300×355 | |
Max. Grinding Length | mm | 630 | |
Max. Grinding Width | mm | 320 | |
Distance From Table Surface To Spindle Center | mm | 530 | |
Slide way |
| V-type rail with Steel-ball | |
V-type rail with Steel-ball | Kg | 200 | |
Table Size (L×W) | mm | 600×300 | |
Number of T -Slot | mm×n | 14×1 | |
V-type rail with Steel-ball | m/min | 3-20 | |
Cross Feed On Handwheel | mm | 0.02/Graduation 2.5/revolution | |
Vertical Feed On Handwheel | mm | 0.01/Graduation 2.0/revolution | |
Wheel Size (dia×width×bore ) | mm | 250×25.4×76.2 | |
Spindle Speeds | 50Hz | rpm | 1450 |
| 0-6000 | ||
Power of spindle Motor | Kw | 2.2 | |
Hydraulic station moter | Kw | 2.2 | |
Rapid Up and down Motor | W | 120 | |
Working Pressure | Mpa | 4 | |
Max.Capacity | L/min | 20 | |
Minimum Of Numerical | L | 100 | |
Paraller Level | mm | 300:0.005 | |
Surface Roughness | μm | Ra0.32 | |
Machine Size (L×W×H) | mm | 1960×1480×1850 | |
Packing Size (L×W×H) | mm | 1960×1640×2020 | |
Gross,Net | T | 1.43 /1.3 | |
MY1224 hydraulic surface grinder