Click image to view full size image
NOKIN High Strength Epoxy Glue Used in RoadStud
Usage
1.Epoxy glue is used for bondingplastic or mental products on cement roads
2.The reinforcement or bondingfor the precast concrete form or structural strengtning
3.Fissure filling forconcrete
Method:
1. Clean the pasting surface awayfrom any dirt, oil, loose mortar, etc
2.Mix part A and part B as ratio1:1 until well blended
3. Glue the road stud by steelscraper or other tools, then to bond and fix on the roadstud
Announacement:
1. Bonding surface should be dryand clean
2. Do not be load at early geltime
3. It should be used out within30 minutes after mixing glue
4. Under 25 °C, it beigins tocure within 40-60 minutes, then fully cure 24 hours later, andreach well strength.
5. The glue can be kept one yearin the original sealed storage with 12 monthes shelflife
Technicaldata:
| Temperature(°C) | Workable time(min) | Geltime (min) | Total curing time(h) |
| 5~10 | 40 | 50 | 48 |
| 10~20 | 30 | 35 | 24 |
| 20~30 | 20 | 25 | 24 |
| 30~40 | 10 | 15 | 18 |
Notes:
1. Affect the glueing result bybonding surface, glue ratio and mixture, the evenness and densityof adhensive layer
2.The glue should be stored in asealed strorage with 12 monthes shelf life.
NOKIN Short Gel Time Epoxy Paint
