Pale Yellow Anionic Softener Flakes , Textile Softener Flake For Blended Fabrics
SOULBIO AT (Anionic Softener)
Chemical Composition
Special derivative of fatty acid compound
Technical Specification
Appearance: pale yellow flakes
PH value: 6~8(510% solution)
Ionicity: anionic
Dissolving Method
Temperature raising : Add the flakes in water(room temperature )gradually in the proportion of 5-10%, stir them and heat up to ( 65~75 ) and stir them for 30-60 mins again until the flakes become even paste, then cool it down.
High temperature : Add the flakes in water ( 65~75) gradually in the proportion of 5-10%,
stir them for 30-60 mins again until the flakes become even paste, then cool it down.
Properties
Impart very soft, Smooth and full handle to fabric
Good hydrophilic, antistatic and low yellowing properties , no influence on whiteness
Compatible with anionic and nonionic auxiliaries except cationic auxiliary
Field of Application
Applied to softening finishing and hydrophilic finishing of all kinds of fibres , especially for cotton , linen and their blended fabrics
Application
Padding: Dosage:2030g/L (10% solution) Temperature: 3040
Process: one dip and one pad or two dips and two pads
Dipping: Dosage:38% (o.w.f) (10% solution) Liquor ratio: 1:1015
Temperature: 4050 Time: 30min
Storage and Packing
Shelf life: 12 months when s
Pale Yellow Anionic Softener Flakes , Textile Softener Flake For Blended Fabrics