Click image to view full size image
Plastic injection moulding machine
| MODEL | CH-80 T | ||||
| Injection Unit | Unit | A | B | ||
| Screw Diameter | mm | 32 | 35 | ||
| Screw L/D Ratio | L/D | 21.8 | 20 | ||
| Shot size(Theoretical) | cm3 | 119 | 142 | ||
| Shot Weight(PS) | g | 101 | 121 | ||
| Plasticizing Capacity(PS) | g/s | 8.2 | 13.5 | ||
| Injection Pressure | Mpa | 215 | 170 | ||
| Screw Speed | rpm | 0-220 | |||
| Clamping Unit | Clamping Stroke | KN | 800 | ||
| Platen Stroke | mm | 275 | |||
| Distance Between Tie-bars | mm | 317*317 | |||
| Max.Mould Thickness | mm | 350 | |||
| Min.Mould Thickness | mm | 150 | |||
| Ejector Stoke Distance | mm | 80 | |||
| Ejector Tonnage | KN | 33 | |||
| Ejector Number | P | 1 | |||
| Others | Max.Pump Pressure | Mpa | 16 | ||
| Pump Motor Power | KW | 9 | |||
| Heater Power | KW | 5.9 | |||
| Machine Dimensions(L*W*H) | m | 4.1*1.2*1.8 | |||
| Machine Weight(about) | T | 2.8 | |||
Features:
1) LCD computer control with big display screen
2)Hydraulic double proportional valve
3) Generous space for fitting large moulds
4)Large opening stroke
5)Two positon transducers to control clamping and injection
6)Hydraulic mould height adjustment device
7)screw cold-start prevention device
8) Melt decompression control
9) Screw back pressure control
10) Multiple hydraulic ejection
11) Differential area high speed clamping
12) centralized lubrication system
13) Low pressure mould protection device
14) Mechanical safety interlock
15) Double electrical safety interlock
16) Oil return filter
17) Oil tank with inner stainless steel container
plastic injection moulding machine PLC CHX-80T
