Click image to view full size image
Description:
1.with nylon canvas as casing ply2.The impact-resistant, avulsion-resistant nylon belt
3.The sectional drawing of the product
rubber conveyorbelt/conveyor rubber belt Specifications
(1) with the corematerial: CC-56, NN100, NN150, NN200, NN300,NN400
(2) bandwidth:100mm-2200mm
(3) cloth layer:2-10-storey
(4) plastic cover: Face:1.5-8mm non-face: 0mm-4.5mm
rubber conveyorbelt/conveyor rubber belt Features:
1.increases the transmission angle (30 ~ 90degrees);
2. covers an area ofsmall, low investment;
3, throughput, andenhance the high degree of higher
4. from level to tilt(or vertical) will make a smooth transition;
5.Lowelongation
6. suitable for easytransportation of powder, granular, small block, paste andliquid-like materials
7. low energyconsumption, simple structure, high strength tape, long servicelife.
8. Heat-resistantconveyor belt
9. Oil resistantconveyor belt
rubber conveyorbelt/conveyor rubber belt Applications:
1.Appliedfor electric motors, internal combustion engines and powertransmission equipments.
2.Adopting scientifictechnical composition, specially selected first class rubbermaterial and low elongation reinforcing,
3.MOLIbrand CommonV-belt is in accordance with related internationalstandard.
4. high wearingresistance, low elongation and long life.
5.T he conveyor belthas passed the test, such as flame-retardant experiments, andobtained a certificate of coal signs and an authorizeduser.
rubber conveyorbelt/conveyor rubber belt Structure:
Conveyor belt is madeup of upper , stretching layer , strength layer and compressionlayer .
(1) rollerfriction: roller surface temperature of not more than 325degrees.
(2) torch burning:cotton degrees higher than the average time of flame torch 3.0S, tocover an average of less than 5.0S.
(3) propane burner;Nondestructive longer than 250mm.
Surface resistancevalues: on, below the average of not more than 3.0 × 10 8 powerΠ
With regard to thechoice of the thickness of plastic cover:
rubber conveyorbelt/conveyor rubber belt Size:
Physical Characters Ofconveyor belt
Iterm | Between Plies N/mm | N/mm Between rubber and carcass | Elongation | ||
0.8-1.5mm | >1.5mm | Longitudinal elongation at break % ≥ | Longitudinal elongation at reference load % ≤ | ||
All the sample average ,N/mm, ≥ | 3.2 | 2.1 | 2.7 | ||
All samples minimum peak,N/mm, ≥ | 2.7 | 1.6 | 2.2 | 10 | 4 |
Note: All samples shall not exceed the peak values20N/mm | |||||
SIZE
Conver grade | Tensile strength ≥ | Elongation ≥ | Abrasion ≤ | Change Rate of tensile strengh and elong after aging | |
Mpa | Kgf/m2 | % | mm3 | % | |
(H) | 24 | 240 | 450 | 120 | -25~ 25 |
(D) | 18 | 180 | 400 | 100 | -25~ 25 |
Light(L) | 15 | 150 | 350 | 200 | -25~ 25 |
Store AndTransport
1.In storage and transportationof Conveyor belt , direct sunshine as well as the soaking of rainof rain and snow should be kept clean and the contact with acid,alkali, oil and organic solutions should be prevented.Cares shouldbe taken to prevent mechanical damage.And, the belt should be 1 Kmaway from heat radiation devices.
2.The storage temperature shouldbe -18-- 40.
3.The performance will be keptunchanged in one year when the belt is in storage under the abovecondition.
| Specifications | ST 630 | ST 800 | ST 1000 | ST 1250 | ST 1600 | ST 2000 | ST 2500 | ST 3150 | ST 3500 | ST 4000 | ST 4500 | ST 5000 | ST 5400 |
| Longitudinal tensilestrength(N/mm) | 630 | 800 | 1000 | 1250 | 1600 | 2000 | 2500 | 3150 | 3500 | 4000 | 4500 | 5000 | 5400 |
| Nominal diameter of thelargest wire rope mm | 3 | 3.5 | 4 | 4.5 | 5 | 6 | 7.2 | 8.1 | 8.6 | 8.9 | 9.7 | 10.9 | 11.3 |
| Spacing Wire Rope(mm) | 10±1.5 | 10±1.5 | 12±1.5 | 12±1.5 | 12±1.5 | 12±1.5 | 15±1.5 | 15±1.5 | 15±1.5 | 15±1.5 | 16±1.5 | 17±1.5 | 17±1.5 |
| Cover layer thickness(mm) | 5 | 5 | 6 | 6 | 6 | 8 | 8 | 8 | 8 | 8 | 8 | 8.5 | 9 |
| Under the cover layerthickness (mm) | 5 | 5 | 6 | 6 | 6 | 6 | 6 | 6 | 8 | 8 | 8 | 8.5 | 9 |
Cover rubber"s characteristics of the belts
rubber conveyor belt/conveyor rubber belt
