stainless steel submersible sewage water pump wjit energy saving

QDX Ironclad  Submersible sewage water Pump

1.Product Overview of submersible sewage water pump:

QDX series submersible pump consist of water pump, seals and single or three phase asynchronous submersible motor.

The pump is provides with advantages such as small size and light weight , easy moving and convenient installation, high efficiency and energy saving, reliability and etc.

 2.Range of Performance of submersible sewage water pump:

(1). Capacity from 1.5 to 15 (m3/h)

(2). Total head from 7-32(m

3.Application Conditions of submersible sewage water pump:

   The QDX series pump is suitable for delivering clean water such as river, lack water, well water and other liquids with the same charaters with clean water whose temperature is below 40°c and PH value between 6.5-8.5.

   Content of solids in water should not exceed 10 meters.

   Every QDX series pump has a thermal protector, which will cut off antomatically when the voltage is in not normal or overload condition, then after the temparature turns normal (about 3 or 10 min later) he thermal protector will automatically restart again. And when it appears start-stop again and again, the power ahould be cut off till the motor is cool enough to restart it.

4.Structure Feature of submersible sewage water pump:

(1). Pump body: Cast iron, Stainless steel, or Aluminum

(2). Motor bracket: Cast iron, Stainless steel, or Aluminum

(3). Impeller: Cast iron, Stainless steel, Aluminum or Plastic 

(4). Motor shaft: Ss420 or Cs 45#

(5). Mechanical seal: Carbon/ Ceramic/ Graphite or Silicon carbide-carbide alloy

(6). Electric Motor: single phase 220V 50Hz with capacitor and thermal overload protector. Therr phases 380V - 50Hz. Voltage fluctuation for 10% more or less is allowed and other Voltage for 60Hz is also avaliable.

(7). Insulation Class: E

(8). Protection: IP X8