Click image to view full size image
SYZ MACHINE Clevis 5/8" RH Thread - 3/8" Slot & Hole Yellow
APPLICATIONS
Clevises are normally used where articulation is only required in one plane. In most cases the other end of this type of linkage would require some form of right angle Ball Joint or studded Rod End as they are usually bolted directly into a Bell Crank or Lever of some sort.
A beautiful polished stainless steel clevis ideal for your hot rods' suspension! The shank features 5/8" RH fine threads. Has a 3/8" wide slot and 3/8" diameter hole.
SPECIFICATIONS
| MALE CLEVIS | THREAD | B | D | W | S | A | C | |
| RIGHT | LEFT | MALE | DIA. | DIA. | WIDTH | WIDTH | LENGTH | LENGTH |
| HAND | HAND | 3A | +0.005 | +0.010 | +0.005 | +0.005 | +0.015 | +0.062 |
| PART NO. | PART NO. | REF | -0.000 | -0.010 | -0.005 | -0.005 | -0.015 | -0.031 |
| CR4-5 | CL4-5 | 5/16-24 | 0.2500 | 0.875 | 0.625 | 0.188 | 2.250 | 1.250 |
| CR5-5 | CL5-5 | 5/16-24 | 0.3125 | 0.875 | 0.625 | 0.188 | 2.250 | 1.250 |
| CR5-6 | CL5-6 | 3/8-24 | 0.3125 | 0.875 | 0.625 | 0.188 | 2.250 | 1.250 |
| CR5-8 | CL5-8 | 1/2-20 | 0.3125 | 1.000 | 0.750 | 0.250 | 2.500 | 1.500 |
| CR6-8 | CL6-8 | 1/2-20 | 0.3750 | 1.000 | 0.750 | 0.250 | 2.500 | 1.500 |
| CR6-10 | CL6-10 | 5/8-18 | 0.3750 | 1.125 | 0.825 | 0.375 | 3.375 | 2.000 |
| CR6-12 | CL6-12 | 3/4-16 | 0.3750 | 1.125 | 0.825 | 0.375 | 3.375 | 2.000 |
| CR7-8 | CL7-8 | 1/2-20 | 0.4375 | 1.125 | 0.825 | 0.375 | 3.375 | 2.000 |
| CR7-10 | CL7-10 | 5/8-18 | 0.4375 | 1.125 | 0.825 | 0.375 | 3.375 | 2.000 |
| CR8-10 | CL8-10 | 5/8-18 | 0.5000 | 1.125 | 0.825 | 0.375 | 3.375 | 2.000 |
| CR8-12 | CL8-12 | 3/4-16 | 0.5000 | 1.125 | 0.825 | 0.250 | 3.375 | 2.000 |
| CR8-12-1 | CL8-12-1 | 3/4-16 | 0.5000 | 1.125 | 0.825 | 0.375 | 3.375 | 2.000 |
Material: Zinc plated carbon steel
304 or 316 stainless steel, aluminum optional.
PRODUCTION PROCESS
TYPES
1. Clevis with clevis retention clip
2. Clevis with clevis pin and saftey fastener
3. Clevis with clevis pin and circlip
4. Clevis with clevis pin, washer and cotter pin
Metric Sizes:
| PART |
| NO. |
| G 4x8 |
| G 4x16 |
| G 5x10 |
| G 5x20 |
| G 6x12 |
| G 6x24 |
| G 8x16 |
| G 8x16FG |
| G 8x32 |
| G 8x32FG |
| G 10x20 |
| G 10x20FG |
| G 10x40 |
| G 10x40FG |
| G 12x24 |
| G 12x24FG |
| G 12x48 |
| G 12x48FG |
| G 14x28 |
| G 14x28FG |
| G 14x56 |
| G 14x56FG |
| G 16x32 |
| G 16x32FG |
| G 16x64 |
| G 16x64FG |
| G 18x36 |
| G 18x36FG |
| G 20x40 |
| G 20x40FG |
| G 20x80 |
| G 20x80FG |
| G 25x50 |
| G 25x50FG |
| G 28x56 |
| G 28x56FG |
| G 30x54FG |
| G 30x60 |
| G 30x60FG |
| G 35x54FG |
| G 35x72 |
| G 35x72FG |
| G 36x72 |
| G 36x72FG |
| G 40x84FG |
| G 42x84 |
| G 42x84FG |
| G 50x96 |
| G 50x96FG |
We have clevises in different configurations. We can also build custom sizes according to prints or samples provided.
Find other listings here or go to our website: www.syzmachine.com for more information.
Contact us if you need any assistance.
Standard Clevis, 5/8" Thread, 3/8" Slot, 3/8" Hole
