Tip-over switches SW-850D

Tip-over switches SW-850D

Function:

1.       horizontal tilt anti-fall detecting

2.       vertical flip anti-fall detecting

Applications

1.      Heating device anti-fall

2.      Electric fan anti-fall

3.      Home appliances anti-fall

Features:

1.       SW-850D is Ball type tilt vibration sensitive switch

2.       When the product upright is in ON-state, as the products tilt to any direction and exceed 45 degrees, switch stay in a disconnect OFF-state

3.       Product completely airtight, waterproof, dustproof

4.       In the normal, switch life can reach 10,0000 cycles lifespan

5.       Material compliant with ROSH directive, replace the mercury switch

6.       Simple for switch signals and circuit , and economic price

Electrical characteristics:

Voltage: <12V

Current: <20mA

Conductive time: about 0.5ms

Closed resistance: <30 ohm

Open resistance: >value="10" tcsc="0" unitname="m" w:st="on">10M ohm

Mechanical characteristics:

Temperature range: Operating: -40 to value="80" tcsc="0" unitname="ﾰC" w:st="on">80°C

Pull force of terminal: 500gf for 1 minute

Humidity: 95% RH, value="40" tcsc="0" unitname="ﾰC" w:st="on">40°C for 96 hours

Operating lifespan: 100,000 cycles

Bill of material:

Copper cap: copper tube copper-plated

Guide pin : brass wire, gold-plated

Ball: dual Stainless steel, silver-plated

Sealing colloidal particle: Heat resistance nylon

Skin: PE Shrink Sleeve

Welding characteristics

   Solder tin, tin content 100%

   Welding humidity: value="260" tcsc="0" unitname="ﾰC" w:st="on">260°C ±value="10" tcsc="0" unitname="ﾰC" w:st="on">10°C

   Welding time: 2-2.5 seconds

Do not use strong acid alkali flux

Packaging: 1000PCS/bag (PVC plastic)

Note

1.      If the product used for high security products and durability of extremely high equipment (such as life safety equipment, aviation facilities, disaster prevention device), please confirm whether a share, can seek advice our company for details

2.      In case of fire, Please do not overload applicable,

3.      The welding temperature or time more than standard, can cause switch collapse

4.      Do not use water solubility flux. May cause damage to the switch

5.      Do not use solvent wash switch

6.      This switch conduction rate of 98% (conductivity rate per 100 times value switch actions, can good conduction ratio)