Click image to view full size image
Protect your property from damage by water leakage caused by ruptured pipes and overflowing drains.
Shut off valve size:1/2",3/4",1"
8 pcs water detection sensors
6 M length wire
Different Power suitable for different countries
1) How it works: 1. When a leakage is detected, the water leak detector system will make an audible alarm with a flashing LED and automatic shut off the electronic ball valve. 2. The alarm is keeping “beep” until you hear it and deal with the water leak or water overflow. Then press the ”open” button to open the valve and “reset” button to make the gear ready for next potential leakage.
2) Easily Installation: Step 1.Place the water leak alarm on a dry surface, or hang on the wall. Step 2.Press the test button, the unit is working if you hear a "beep, beep, beep" alarm and the red LED is flashing. Step 3.Plug the water sensor into the Φ 3.5mm socket of water leak alarm, and place the sensor on the ground or anywhere you would like it to detect potential water leakages.
3) Recommended Places:
Residential Application,Commercial Applications:
Sump Pits Computer Rooms
Washing machines Storage Facilities
Dish washers Libraries/Museums
Ice makers Warehouses
basement walls Mechanical Rooms
Air conditioners Commercial Buildings
Hot water tanks Air Handlers
Water heater Piping Systems
Sink drains The central air-conditioning system
Piping Dehumidifiers
Bathroom Laundry
Floor drains Boiler
water leak alarm & automatic shut off system
