Click image to view full size image
Specifications:
- wood charcoal production line 1.Capacity:150-350kg/h 2.Briquettediameter:50/80mm 3.Raw material : sawdust, biomass straw, rice husk
Description:
Raw material requirements:
1. Raw material: sawdust, wood branches, wood residues, rice husk, peanut shell, corn stalk,
bamboo, sunflower shell, cotton stalk, coconut shell, bagasse, corncob, leaves and any other
agricultural waste.
2. Raw material size: 3-5mm.
3. Raw material moisture: 8-12%.
General Description:
The line includes mainly 7 machines, not all of the machine is necessary. You can choose from
the machines.
Step 1: Crusher-- It is used to crush the raw material into sawdust with size 3-5mm.
Step2: Screw conveyor--It is used to transfer the sawdust to the dryer machine.
You can also use man power instead of this machine.
Step 3: Dryer--If the moisture of the powder is more than 12%. Then you can use this machine.
Step 4: Screw conveyor--It is used to transfer the powder to the wood Briquette extruder
machine.You can also use man power instead of this machine.
Step 5: Wood Briquette extruder machine--It is used to make the powder into half-charcoal-stick.
Step 6 : conveyor Belt --It is used to transfer the half-charcoal-stick,you can also use man
power instead of the machine.
Step 7:Carbonization Furnace -It is used to carbonize the half-charcoal-stick into
the charcoal-stick.
Main Parameers ofthe extruding machine :
Model No. | SLB-1 | SLB-2 | SLB-3 |
Output | 150-200kg/h | 200-250kg/h | 260-350kg/h |
Main Motor Power | 15kw | 18.5kw | 18.5kw |
Electrical Heater Power | 3X1.5kw | 3X2kw | 3X2kw |
Dia. of Briquettes | Ø40 Ø45 Ø50 mm | Ø60 Ø70 mm | Ø70 Ø80 mm |
Density of Briquettes | 1.2-1.4T/CBM | ||
Note:
1.If you do not want to buy the screw Conveyors,you can use man power to instead them.
2. If you want to increasethe capacity , you just need to add the quantity of theextruding machine .
wood charcoal press machine with low price
