WS-3H15 Brushless Dc Motor Driver, BLDC motor driver, 15A, 15VDC-50VDC

Instruction for WS-3H15high-efficiency brushless dc motor drivers

CHARACTERISTICS:

1.DC voltage 15VDC-50VDC

2.PWM Frequency over 12KHZ

3. Input signa is compatible with TTL

4. The most driving current 15A

5.size:118*75*33 mm

6.weight:0.27Kg

NOTE:

1. +AT,-AT port is outside DC power supply     

2.U port for motor U pin

3. V port for motor V pin

4. W port for motor W pin

5. +5V for sensor power

6. GND for sensor or control GND

7. HALL A is sensor A input

8. HALL B is sensor B input

9. HALL C is sensor C input

10. CW is for motor forward direction, active low

11. CCW is for motor reverse direction, active low

12. AD for motor speed(0-5V or 0-10V)

13. BRAKE port is braking input end,low level.

14.The driver has ACCpotentiometer for start-up accelerationc, accelerating time from 0.1s to 3s, To adjust accelerating valuet with power off. Out-factory setting 0.1S.

15. SUB SPEED potentiometer is for auxiliary rotate speed adjustment.Different motor parameter need below adjustment.DA input voltage adjusted to 5V,if motor ingspeed is not the highest speed, To rotate SUB SPEED potentiometer clockwise until motor reach to the max speed.

If DA port is less than 5V,motor has reached the max speed, DA port adjust to 5V now. To rotate SUB SPEED potentiometer anti-clockwise until motor reach to the max speed.

ELECTRICAL CHARACTERISTICS:(Tj=25°C)

1.DC voltage 15VDC-50VDC

2.Most output current 15A

3.insulating resistance over 500MΩ

OPERATING ConDITION AND PARAMETER:

1.cooling method: naturally and imperatively

2.condition;avoid soot and corrosive air

3.temperature: 0ºC-+50ºC

4.humidity: 40-89%RH.

POWER SUPPLY:

The power supply works between DC15V to DC50V

ConNECTION DIAGRAM:

A complete brushless DC motor driver control system includes brushless DC motor, brushless DC motor driver,DC power and control signal.Below is typical system chart.