Click image to view full size image
Description:
only need about 50 minutessave 60% phsical force
small blood loss and less injury,
the postoperative parts are very even
1 Work principle: pneumatic handle works in low frequency(notstrenuous resonance) and in four directions to break the fat and drawsthem out of the body
2 Use less energy than resonance and save 60% physicalforce, only need 50 minitues .Up to 10-12 parts at one time, Bigvolume; the ratio of water and fat is 1:3
3 The postoperative parts are very even due to thesectorial motion.
4 Small blood loss and less injury(the handle can easy destroythe fat and protect the non-fat organization effectively dueto the special vibrating way (cyclone pneumatic passage)
5 There is no need to analgetic for the light pain after theoperation.Short recovery period
6 No electric element, no electromag-neticradiation and no heat; it wont hurt body; high temperature andpress sterilization is available.
7 Pneumatic handle has s long useful life for itworks in the way of piston, not be easily damaged.
Technical Parameters :
Dimensions | 400 x 420 x 1020 mm | |
Net Weight | 22 Kgs | |
Power | AC220V ±22V | |
Input Power | 350 Watts | |
Voltage Control | DC24V | |
Noise | ≤45db | |
Aspirator | Vaccum Accuracy | ≥0.094 mpa |
Air Pumping Velocity | 160 l/min | |
Pneumatic Handle Motion | Vibration Frequency | 10 Hz |
Elongation | 6 mm | |
Infiltration System | Speed | 0-300 rpm |
Flux | 1140 ml/min | |
Operation Mode | User-friendly | Soft Button Control Panel |
liposuction JNZB-A equipment
