Click image to view full size image
Specifications:
- 1. using four-edge knife, easy to use and low cost. 2.knife platevoltage controlled by the hydraulic control, advanced structure,reliable performance. 3.feed part adopt stepless speed .It has goodpeeling effect on the cold wood, curved wood, eucalyptus, oak, elmand other tree species has a good hard . 4.peeling the netentirely, high productivity, little injury for the wood .
Description:
The large machine is new model and high efficient product.It uses the rotor with ladder-type stripping teeth to produce special forces,making the timber do turning motion and irregular beating movement.After fricting ,hitting and compressing and stripping during the timber section and claw teeth ,timber and timber section,timber section and slot,causing the wood bark and trunk separate each other fast ,and reaching high efficient peeing bark function.
The features :
1.It uses open-type slot ,making the wood come into the inlet at one point ,and get out from other end by automatic production-line operation,overcoming other wood debarker machine which have to stop electric to get into the wood ,getting out these shortcoming.
2.As the hitting of claw teeth on timber section ,so make the wood recycling movement that peel the wood bark.And it is also suitable for frozen wood ,pine and so on.
3.It can adapt to different species and diameter ,length .Especially Concave curved section Wood can have good touch with Ladder-type stripping claw teeth part,so avoid the other wood debarker machine have strict with the timber length and diameter.
4. As large stationary machine , small energy noise vibration much lower than the skinned drum machine , even without base install . It matches convenient access to materials delivery system and reduce labor intensity of the operator to increase production efficiency.
Dimension (mm) | SlWD-A Model :L8000*W1200*H1600 SlWD-B Model : L9600*W1200*H1600 |
Motor powder(KW) | 11-15kw |
Wood Diameter(mm) | 60mm-750mm |
Peeling wood bark vate | ≥90% |
Capacity (t/h) | SlWD-A Model :8 m/h 3-5t/h SlWD-B Model: 9.6 m/h 5-8t/h |
Operator | 2-3 persons |
wood debarker machine
